PLANET WGS3-24000 - Manual (Page 470)

470
Authentication Type The OSPF Authentication Type for the specified interface are: none, simple, and encrypt.
The information below will only be displayed if OSPF is enabled.
OSPF Interface Type Broadcast LANs, such as Ethernet and IEEE 802.5, take the value broadcast. The OSPF
Interface Type will be 'broadcast'.
State The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router,
and backup designated router.
Designated Router The router ID representing the designated router.
Backup Designated
Router
The router ID representing the backup designated router.
Number of Link Events The number of link events.
Metric Cost The cost of the OSPF interface.
12.7.49 show ip ospf interface brief
This command displays brief information for the IFO object or virtual interface tables.
▫ Format show ip ospf interface brief
▫ Modes Privileged EXEC
User EXEC
Interface Valid slot and port number separated by forward slashes.
OSPF Admin Mode States whether OSPF is enabled or disabled on a router interface.
OSPF Area ID Represents the OSPF Area Id for the specified interface.
Router Priority A number representing the OSPF Priority for the specified interface.
Hello Interval A number representing the OSPF Hello Interval for the specified interface.
Dead Interval A number representing the OSPF Dead Interval for the specified interface.
Retransmit Interval A number representing the OSPF Retransmit Interval for the specified interface.
Retransmit Delay Interval A number representing the OSPF Transit Delay for the specified interface.
LSA Ack Interval A number representing the OSPF LSA Acknowledgement Interval for the specified