PLANET WGS3-24000 User Manual
Page 266
266
。
Secondary Address
- The ip address for which data is to be displayed. Create must be selected to add a
secondary address to the interface.
Configurable Data
。
IP Address
- Enter the IP address for the interface. This address must be a member of one of the subnets currently
configured on the interface. This value is readonly once configured.
Non-Configurable Data
。
Slot/Port
- The interface for which data is to be displayed or configured.
。
Virtual Router ID
- The Virtual Router ID for which data is to be displayed or configured.
。
Primary IP Address
- The Primary IP Address of the Virtual Router.
Command Buttons
。
Submit
- Update the switch with the values on this screen. If you want the switch to retain the new values across a
power cycle, you must perform a save.
。
Delete
- Delete the selected secondary IP Address
。
Cancel
- Return to the Virtual Router Configuration screen.