1 port access control – PLANET WGS3-24000 User Manual
Page 146
146
retransmit the request. If no response is received from the server after the specified number of attempts, authentication fails,
and network access is not granted.
When a client logs off, it sends an EAPOL-logoff message, causing the switch port to transition to the unauthorized state.
If the link state of a port transitions from up to down, or if an EAPOL-logoff frame is received, the port returns to the unauthorized
state.
4.4.1 Port Access Control
4.4.1.1 Port Access Control Configuration
This page is to Enable/Disable the port access control administrative mode.
。
Administrative Mode -
This selector lists the two options for administrative mode: enable and disable. The default
value is disabled.
Figure 4-4-1
Port Access Control Configuration
4.4.1.2 Port Access Control Port Configuration
。
Port -
Selects the port to be configured. When the selection is changed, a screen refresh will occur causing all
fields to be updated for the newly selected port. All physical interfaces are valid.
。
Control Mode -
This selector lists the options for control mode. The control mode is only set if the link status of the
port is link up. The options are:
¾
force unauthorized:
The authenticator port access entity (PAE) unconditionally sets the controlled port to
unauthorized
¾
force authorized:
The authenticator PAE unconditionally sets the controlled port to authorized.