PLANET WGS3-24000 - Manual (Page 25)

25
2.1.2 Switch Front Panel
Figure 2-1 shows the front panel of the switch.
Figure 2-1 WGS3-24000 front panel.
2.1.3 LED Indications
Network:
LED Color Function
PWR Green Lights to indicate that the Switch is powered on.
LNK/ACT Green Lights to indicate the link through that port is successfully established.
FDX Green Blink to indicate the switch is actively sending or receiving data over that port.
Gigabit:
LED Color Function
LNK/ACT Green Lights to indicate the link through that port is successfully established.
FDX/COL Green Blink to indicate the switch is actively sending or receiving data over that port.
2.1.4 Switch Rear Panel
Figure 2-2 shows the rear panel of the switch
Figure 2-2 WGS3-24000 rear panel.
Power Notice:
1. The device is a power-required device, it means, it will not work till it is powered. If your networks should active all the time,
please consider using UPS (Uninterrupted Power Supply) for your device. It will prevent you from network data loss or
network downtime.
2. In some area, installing a surge suppression device may also help to protect your switch from being damaged by
unregulated surge or current to the Switch or the power adapter.