PLANET WGS3-24000 - Manual (Page 495)

495
Interface Mode This field indicates whether DVMRP is enabled or disabled on the specified interface. This
is a configured value.
Metric This field indicates the metric of this interface. This is a configured value.
Local Address This is the IP Address of the interface. This Field is displayed only when DVMRP is
operational on the interface.
Generation ID This is the Generation ID value for the interface. This is used by the neighboring routers to
detect that the DVMRP table should be resent.
The following fields are displayed only if DVMRP is enabled on this interface.
Received Bad Packets This is the number of invalid packets received.
Received Bad Routes This is the number of invalid routes received
Sent Routes This is the number of routes that have been sent on this interface.
13.2.6 show ip dvmrp neighbor
This command displays the neighbor information for DVMRP.
▫ Format show ip dvmrp neighbor
▫ Modes Privileged EXEC User EXEC
IfIndex This field displays the value of the interface used to reach the neighbor.
Nbr IP Addr This field indicates the IP Address of the DVMRP neighbor for which this entry contains
information.
State This field displays the state of the neighboring router. The possible value for this field are
ACTIVE or DOWN.
Up Time This field indicates the time since this neighboring router was learned
Expiry Time This field indicates the time remaining for the neighbor to age out. This field is not
applicable if the State is DOWN.
Generation ID This is the Generation ID value for the neighbor.
Major Version This shows the major version of DVMRP protocol of neighbor.
Minor Version This shows the minor version of DVMRP protocol of neighbor.