PLANET WGS3-24000 - Manual (Page 515)

515
Unit/Slot/Port Valid unit, slot and port number separated by forward slashes.
Interface Mode This field indicates whether PIM-SM is enabled or disabled on the interface. This is a
configured value.
Protocol State This field indicates the current state of the PIM-SM protocol on the interface. Possible
values are Operational or Non-Operational.
13.5.15 show ip pimsm componenttable
This command displays the table containing objects specific to a PIM domain. One row exists for each domain to which the
router is connected.
▫ Format show ip pimsm componenttable
▫ Mode Privileged EXEC and User EXEC
Component Index This field displays a number which uniquely identifies the component.
Component BSR Address This field displays the IP address of the bootstrap router (BSR) for the local PIM region.
Component BSR Expiry
Time
This field displays the minimum time remaining before the BSR in the local domain will be
declared down.
Component CRP Hold
Time
This field displays the hold time of the component when it is a candidate.
13.5.16 show ip pimsm interface
This command displays the interface information for PIM-SM on the specified interface.
▫ Format show ip pimsm interface
▫ Mode Privileged EXEC and User EXEC
Unit/Slot/Port Valid unit, slot and port number separated by forward slashes.
IP Address This field indicates the IP address of the specified interface.
Subnet Mask This field indicates the Subnet Mask for the IP address of the PIM interface.
Mode This field indicates whether PIM-SM is enabled or disabled on the specified interface. This
is a configured value. By default it is disabled.