PLANET WGS3-24000 User Manual
Page 82
82
4.2.11.2 Pool Configuration
DHCP Server Pool Configuration
Figure 4-2-51 DHCP Server Pool Configuration
Configurable Data
。
Pool Name*
- For a user with readwrite permission, this field would show names of all the existing pools along with
an additional option "Create". When the user selects "Create" another text box "Pool Name" appears where the user
may enter name for the Pool to be created.For a user with readonly permission, this field would show names of the
existing pools only.
。
Pool Name
- This field appears when the user with read-write permission has selected "Create" in the Drop Down
list against Pool Name*.Specifies the Name of the Pool to be created. Pool Name can be upto 31 characters in
length.
。
Type of Binding
- Specifies the type of binding for the pool.
•
Unallocated
•
Dynamic
•
Manual
。
Network Number
- Specifies the subnet number for a DHCP address of a dynamic pool.
。
Network Mask
- Specifies the subnet number for a DHCP address of a dynamic pool. Either Network Mask or Prefix
Length can be configured to specify the subnet mask but not both.
。
Prefix Length
- Specifies the subnet number for a DHCP address of a dynamic pool. Either Network Mask or Prefix
Length can be configured to specify the subnet mask but not both. Valid Range is (0 to 32)
。
Client Name
- Specifies the Client Name for DHCP manual Pool.