PLANET WGS3-24000 User Manual
Page 134
134
4.3.8.1 Spanning Tree Switch Configuration/Status
This page is to enable/disable the Spanning Tree protocol. The switch support IEEE 802.1d Spanning Tree (STP), IEEE 802.1w
Rapid Spanning Tree (RSTP) and IEEE 802.1S Multiple Spanning Tree (MSTP).
Figure 4-3-33
Spanning Tree Switch Configuration/Status
Configurable Data
。
Spanning Tree Mode -
Specifies whether spanning tree operation is enabled on the switch.
Value is enabled or disabled
。
Force Protocol Version - Specifies the Force Protocol Version parameter for the switch.
The options are IEEE 802.1d, IEEE 802.1w and IEEE 802.1s
。
Configuration Name-
Identifier used to identify the configuration currently being used. It may be up to 32
alphanumeric characters
。
Configuration Revision Level -
Identifier used to identify the configuration currently being used. The values
allowed are between 0 and 65535.
The default value is 0.
Non-Configurable Data
。
Configuration digest key -
Identifier used to identify the configuration currently being used.
。
MST Table -
Table consisting of the MST instances (including the CST) and the corresponding VLAN IDs
associated with each of them.
。
VID Table -
Table consisting of the VLAN IDs and the corresponding FID associated with each of them.
。
FID Table -
Table consisting of the FIDs and the corresponding VLAN IDs associated with each of them.