PLANET WGS3-24000 - Manual (Page 369)

369
8.6.68 vlan name
This command changes the name of a VLAN. The name is an alphanumeric string of up to 16 characters, and the ID is a valid
VLAN identification number. ID range is 1- 4094.
▫ Default The name for VLAN ID 1 is always Default. The name for other VLANs is defaulted to a blank string.
▫ Format vlan name <2-4094>
▫ Mode VLAN database
8.6.68.1 no vlan name
This command sets the name of a VLAN to a blank string. The VLAN ID is a valid VLAN identification number. ID range is
1-4094.
▫ Format no vlan name <2-4094>
▫ Mode VLAN database
8.6.69 vlan participation
This command configures the degree of participation for a specific interface in a VLAN. The ID is a valid VLAN identification
number, and the interface is a valid interface number.
▫ Format vlan participation {exclude | include | auto} <1-4094>
▫ Mode Interface Config
▫ Participation options are:
▫ include - The interface is always a member of this VLAN. This is equivalent to registration fixed.
▫ exclude - The interface is never a member of this VLAN. This is equivalent to registration forbidden.
▫ auto - The interface is dynamically registered in this VLAN by GVRP. The interface will not participate in this VLAN unless
a join request is received on this interface. This is equivalent to registration normal.
8.6.70 vlan participation all
This command configures the degree of participation for all interfaces in a VLAN. The ID is a valid VLAN identification number.
▫ Format vlan participation all {exclude | include | auto} <1-4094>
▫ Mode Global Config
Participation options are:
▫ include - The interface is always a member of this VLAN. This is equivalent to registration fixed.
▫ Exclude - The interface is never a member of this VLAN. This is equivalent to registration forbidden.
▫ Auto - The interface is dynamically registered in this VLAN by GVRP. The interface will not participate in this VLAN unless
a join request is received on this interface. This is equivalent to registration normal.
8.6.71 vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces. For VLAN Only mode, untagged frames or priority frames
received on this interface are discarded. For Admit All mode, untagged frames or priority frames received on this interface are
accepted and assigned the value of the interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN Specification.
▫ Default Admit All