PLANET WGS3-24000 - Manual (Page 19)

19
1. INTRODUCTION
1.1 Packet Contents
Thank you for purchasing PLANET 24-Port 10/100/1000Mbps wtih 4 shared SFP Layer 3 Managed Switch- WGS3-24000.
Terms of “WGS3-Layer 3 Switch” means the Switches mentioned titled in the cover page of this User’s manual,
i.e.WGS3-24000.
Check the contents of your package for following parts:
▫ The WGS3 Layer 3 Switch x1
▫ CD-ROM user’s manual x1
▫ Quick installation guide x1
▫ 19” rack mounting kit x1
▫ Power cord x1
▫ Rubber feet x 4
▫ RS-232 Console x 1
If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the
original packing material, and use them against to repack the product in case there is a need to return it to us for repair.
1.2 How to Use This Manual
This User Manual is structured as follows:
Section 2 , Installation
The section explains the functions of the Switch and how to physically install the Switch.
Section 3 , Configuration
The section contains the information about the software function of the Switch.
Section 4 , Web Configuration
The section explains how to manage the switch by Web interface.
Section 5 , Command Structure
The section explains how to manage the switch by Console interface..
Section 6 , Quick Start Up
Section 7, Mode-Base CLI
Section 8 , CLI Command:-Base
Section 9 , CLI Command: Quality of Service
Section 10 , CLI Command: Security
Section 11 , CLI Commands: Switching
Section 12 , CLI Commands: Routing
Appendex A
The section contains cable information of the Switch.
In the following section, terms with lower case "switch" means other Ethernet switch devices.