PLANET WGS3-24000 - Manual (Page 482)

482
case. Simple - a route will not be included in updates sent to the router from which it was learned. Poisoned reverse - a route will
be included in updates sent to the router from which it was learned, but the metric will be set to infinity.
▫ Default simple
▫ Format split-horizon {none | simple | poison}
▫ Mode Router RIP Config
no split-horizon
This command sets the default RIP split horizon mode.
▫ Format no split-horizon
▫ Mode Router RIP Config
12.8.14 redistribute (RIP)
This command configures RIP protocol to redistribute routes from the specified source protocol/routers. There are five possible
match options. When you submit the command redistribute ospf match the match-type or types specified are
added to any match types presently being redistributed. Internal routes are redistributed by default.
▫ Default metric—not-configured
match—internal
▫ Format for OSPF as source protocol
redistribute ospf [metric <0-15>] [match [internal] [external 1] [external 2] [nssa-external 1]
[nssa-external-2]]
▫ Format for other source protocol
redistribute {bgp | static | connected} [metric <0-15>]
▫ Mode Router RIP Config
no redistribute
This command de-configures RIP protocol to redistribute routes from the specified source protocol/routers.
▫ Format no redistribute {ospf | bgp | static | connected} [metric] [match [internal] [external 1] [external 2]
[nssa-external 1] [nssa-external-2]]
▫ Mode Router RIP Config
12.8.15 show ip rip
This command displays information relevant to the RIP router.
▫ Format show ip rip
▫ Modes Privileged EXEC
User EXEC
RIP Admin Mode Enable or disable.