PLANET WGS3-24000 User Manual
Page 105
105
。
Unit/Slot/Port
- Selects the interface to be configured.
Configurable Data
。
Port Security
- Enables or disables the Port Security feature for the selected interface.
。
Maximum Dynamic MAC Addresses allowed
- Sets the maximum number of dynamically learned MAC addresses
on the selected interface.
。
Add a static MAC address
- Adds a MAC address to the list of statically locked MAC addresses for the selected
interface.
。
VLAN ID
- Adds a corresponding VLAN ID for the MAC Address being added to the list of statically locked MAC
addresses for the selected interface.
。
Maximum static MAC Addresses allowed
- Sets the maximum number of statically locked MAC addresses on the
selected interface.
。
Enable violation traps
- Enables or disables the sending of new violation traps designating when a packet with a
disallowed MAC address is received on a locked port.
Command Buttons
。
Submit
- Applies the new configuration and causes the changes to take effect. These changes will not be retained
across a power cycle unless a save configuration is performed.
。
Move
- Converts a dynamically learned MAC address to a statically locked address. The Dynamic MAC address
entries are converted to Static MAC address entries in a numerically ascending order until the Static limit is reached.
#
Notice:
The format of entering MAC Address should be xx : xx : xx : xx : xx : xx