PLANET WGS3-24000 User Manual
Page 108
108
4.3.3.6 Port MAC Deny
This page allows setting up per Port Mac Deny Interface Configuration
Figure 4-3-13
Per Port MAC Deny Interface Configuration
Selection Criteria
。
unit/slot/port
- Selects the interface to be configured.
Configurable Data
。
Enable MAC Deny Feature
- Used to enable or disable the MAC Deny Fe ature for the selected interface.
。
Add a static MAC address and vlan id
- Adds a MAC address and a corr esonding vid to the list of statically locked
MAC addresses for the selected int erface.
。
Maximum static MAC Addresses allowed
- Sets the maximum number of dy namically locked MAC addresses on
the selected interface.
Command Buttons
。
Submit
- Applies the new configuration and causes the changes to take effect.These changes will not be retained
across a pow er cycle unless a save configuration is performed.
4.3.3.7 Port MAC Deny Listing
Figure 4-3-14 Per Port Denied MAC Address Display