PLANET WGS3-24000 - Manual (Page 517)

517
Expiry Time This field indicates the expiry time of the neighbor on this interface.
13.5.19 show ip pimsm rp
This command displays the PIM information for candidate Rendezvous Points (RPs) for all IP multicast groups or for the specific
provided in the command. The information in the table is displayed for each IP multicast group.
▫ Format show ip pimsm rp { | candidate | all}
▫ Mode Privileged EXEC and User EXEC
Group Address This field specifies the IP multicast group address.
Group Mask This field specifies the multicast group address subnet mask.
Address This field displays the IP address of the Candidate-RP.
Hold Time This field displays the hold time of a Candidate-RP.
Expiry Time This field displays the minimum time remaining before the Candidate-RP will be declared
down.
Component This field displays a number which uniquely identifies the component. Each protocol
instance connected to a separate domain should have a different index value.
13.5.20 show ip pimsm rphash
This command displays the RP router that will be selected from the set of active RP routers. The RP router, for the group, is
selected by using the hash algorithm defined in RFC 2362.
▫ Format show ip pimsm rphash
▫ Mode Privileged EXEC and User EXE
CRP IP Address This field displays the IP address of the RP.
Group Mask This field displays the group mask for the group address.