PLANET WGS3-24000 - Manual (Page 453)

453
▫ Format no area nssa default-info-originate [] [{comparable | non-comparable}]
▫ Mode Router OSPF Config
12.7.8 area nssa no-redistribute (OSPF)
This command configures the NSSA Area Border router (ABR) so that learned external routes will not be redistributed to the
NSSA.
▫ Format area nssa no-redistribute
▫ Mode Router OSPF Config
no area nssa no-redistribute (OSPF)
This command disables the NSSA ABR so that learned external routes are redistributed to the NSSA.
▫ Format no area nssa no-redistribute
▫ Mode Router OSPF Config
12.7.9 area nssa no-summary (OSPF)
This command configures the NSSA so that summary LSAs are not advertised into the NSSA.
▫ Format area nssa no-summary
▫ Mode Router OSPF Config
no area nssa no-summary (OSPF)
This command disables nssa from the summary LSAs.
▫ Format no area nssa no-summary
▫ Mode Router OSPF Config
12.7.10 area nssa translator-role (OSPF)
This command configures the translator role of the NSSA. A value of always causes the router to assume the role of the
translator the instant it becomes a border router and a value of candidate causes the router to participate in the translator
election process when it attains border router status.
▫ Format area nssa translator-role {always | candidate}
▫ Mode Router OSPF Config
no area nssa translator-role (OSPF)
This command disables the nssa translator role from the specified area id.
▫ Format no area nssa translator-role {always | candidate}
▫ Mode Router OSPF Config