PLANET WGS3-24000 User Manual
Page 147
147
¾
auto:
The authenticator PAE sets the controlled port mode to reflect the outcome of the authentication
exchanges between the supplicant, authenticator, and the authentication server.
。
Quiet Period -
This input field allows the user to configure the quiet period for the selected port. This command
sets the value, in seconds, of the timer used by the authenticator state machine on this port to define periods of
time in which it will not attempt to acquire a supplicant. The quiet period is the period for which the authenticator
does not attempt to acquire a supplicant after a failed authentication exchange with the supplicant. The quiet
period must be a number in the range of 0 and 65535. A quiet period value of 0 means that the authenticator state
machine will never acquire a supplicant. The default value is 60. Changing the value will not change the
configuration until the Submit button is pressed.
。
Transmit Period -
This input field allows the user to configure the transmit period for the selected port. The
transmit period is the value, in seconds, of the timer used by the authenticator state machine on the specified port
to determine when to send an EAPOL EAP Request/Identity frame to the supplicant. The transmit period must be
a number in the range of 1 and 65535. The default value is 30. Changing the value will not change the
configuration until the Submit button is pressed.
。
Supplicant Timeout -
This input field allows the user to enter the supplicant timeout for the selected port. The
supplicant timeout is the value, in seconds, of the timer used by the authenticator state machine on this port to
timeout the supplicant. The supplicant timeout must be a value in the range of 1 and 65535. The default value is 30.
Changing the value will not change the configuration until the Submit button is pressed.
。
Server Timeout -
This input field allows the user to enter the server timeout for the selected port. The server
timeout is the value, in seconds, of the timer used by the authenticator on this port to timeout the authentication
server. The server timeout must be a value in the range of 1 and 65535. The default value is 30. Changing the
value will not change the configuration until the Submit button is pressed.
。
Maximum Requests -
This input field allows the user to enter the maximum requests for the selected port. The
maximum requests value is the maximum number of times the authenticator state machine on this port will
retransmit an EAPOL EAP Request/Identity before timing out the supplicant. The maximum requests value must
be in the range of 1 and 10. The default value is 2. Changing the value will not change the configuration until the
Submit button is pressed.
。
Reauthentication Period -
This input field allows the user to enter the reauthentication period for the selected port.
The reauthentication period is the value, in seconds, of the timer used by the authenticator state machine on this
port to determine when reauthentication of the supplicant takes place. The reauthentication period must be a value
in the range of 1 and 65535. The default value is 3600. Changing the value will not change the configuration until
the Submit button is pressed.
。
Reauthentication Enabled -
This select field allows the user to enable or disable reauthentication of the
supplicant for the specified port. The selectable values are 'true' and 'false'. If the value is 'true' reauthentication
will occur. Otherwise, reauthentication will not be allowed. The default value is false. Changing the selection will
not change the configuration until the Submit button is pressed.
Command Buttons
。
Initialize -
This button begins the initialization sequence on the selected port. This button is only selectable if the
control mode is is 'auto'. If the button is not selectable, it will be grayed out. Once this button is pressed, the action
is immediate. It is not required to press the Submit button for the action to occur.