7 show ip dvmrp nexthop, 8 show ip dvmrp prune – PLANET WGS3-24000 User Manual
Page 496
![background image](https://www.manualsdir.com/files/865143/content/doc496.png)
496
Capabilities
This shows the capabilities of neighbor.
Received Routes
This shows the number of routes received from the neighbor.
Rcvd Bad Pkts
This field displays the number of invalid packets received from this neighbor.
Rcvd Bad Routes
This field displays the number of correct packets received with invalid routes.
13.2.7 show ip dvmrp nexthop
This command displays the next hop information on outgoing interfaces for routing multicast datagrams.
▫
Format show ip dvmrp nexthop
▫
Modes Privileged EXEC User EXEC
Source IP
This field displays the sources for which this entry specifies a next hop on an outgoing
interface.
Source Mask
This field displays the IP Mask for the sources for which this entry specifies a next hop on
an outgoing interface.
Next Hop Interface
This field displays the interface in unit/slot/port format for the outgoing interface for this
next hop.
Type
This field states whether the network is a LEAF or a BRANCH.
13.2.8 show ip dvmrp prune
This command displays the table listing the router’s upstream prune information.
▫
Format show ip dvmrp prune
▫
Mode
Privileged EXEC and User EXEC
Group IP
This field identifies the multicast Address that is pruned.
Source IP
This field displays the IP Address of the source that has pruned.
Source Mask
This field displays the network Mask for the prune source. It should be all 1s or both the
prune source and prune mask must match.
Expiry Time (secs)
This field indicates the expiry time in seconds. This is the time remaining for this prune to
age out.