PLANET WGS3-24000 User Manual
Page 271
![background image](https://www.manualsdir.com/files/865143/content/doc271.png)
271
o
Slot/Port
- Select the interface number from the dropdown menu. This is the interface that connects to the neighbor
router for the given source IP address.
Command Buttons
o
Submit
- Send the updated configuration to the router. Configuration changes take effect immediately. These
changes will not be retained across a power cycle unless a save is performed.
o
Delete
- Delete the static entry with the selected Source IP address from the Mroute table.
4.7.1.5 Multicast Static Routes Summary
Figure 4-6-53
Milticast Static Routes Summary
Non-Configurable Data
o
Source IP
- The IP Address that identifies the multicast packet source for this route.
o
Source Mask
- The subnet mask applied to the Source IP address.
o
RPF Neighbor
- The IP address of the RPF neighbor.
o
Metric
- The link state cost of the path to the multicast source. The range is 0 - 255.
o
Slot/Port
- The number of the incoming interface whose IP address is used as RPF for the given source IP address.
Command Buttons
o
Refresh
- Refresh the data on the screen with the present state of the data in the router.