PLANET WGS3-24000 - Manual (Page 349)

349
8.6.13.1 no port lacpmode
This command disables Link Aggregation Control Protocol (LACP) on a port.
▫ Format no port lacpmode
▫ Mode Interface Config
8.6.14 port lacpmode all
This command enables Link Aggregation Control Protocol (LACP) on all ports.
▫ Format port lacpmode all
▫ Mode Global Config
8.6.14.1 no port lacpmode all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
▫ Format no port lacpmode all
▫ Mode Global Config
8.6.15 port-channel
This command configures a new port-channel (LAG) and generates a logical slot and port number for it. Display this number
using the "show port-channel".
"
Note : Before including a port in a port-channel, set the port physical mode. See 'speed' command.
▫ Format port-channel
▫ Mode Global Config
8.6.16 port-channel adminmode
This command enables a port-channel (LAG). The interface is a logical slot and port for a configured port-channel. The option
all sets every configured port-channel with the same administrative mode setting.
▫ Format port-channel adminmode { | all}
▫ Mode Global Config
8.6.16.1 no port-channel adminmode
This command disables a port-channel (LAG). The interface is a logical slot and port for a configured port-channel. The option
all sets every configured port-channel with the same administrative mode setting.
▫ Format no port-channel adminmode { | all}
▫ Mode Global Config
▫