PLANET WGS3-24000 - Manual (Page 187)

187
Figure 4-5-20 DiffServ Policy Class Definition – Assign Queue
Figure 4-5-21 DiffServ Policy Attribute Summary
4.5.4.8 DiffServ Service Configuration
Use this page to define the DiffServ policy on each port.
。 Slot.Port - Select the Slot.Port that uniquely specifies an interface. This is a list of all valid slot number and port
number combinations in the system. For Read/Write users where 'All' appears in the list, select it to specify all
interfaces.
。 Policy In - This lists all the policy names of type 'In' from which one can be selected. If 'none' is selected, this will
detach the policy from the interface in this direction. This field is not shown for Read/Write users where inbound
service policy attachment is not supported by the platform.
。 Policy Out - This lists all the policy names of type 'Out' from which one can be selected. If 'none' is selected, this
will detach the policy from the interface in this direction. This field is not shown for Read/Write users where
outbound service policy attachment is not supported by the platform.