PLANET WGS3-24000 - Manual (Page 508)

508
no ip pimdm query-interval
This command resets the transmission frequency of hello messages between PIM enabled neighbors to the default value.
▫ Format no ip pimdm query-interval
▫ Mode Interface Config
13.4.4 show ip pimdm
This command displays the system-wide information for PIM-DM.
▫ Format show ip pimdm
▫ Mode Privileged EXEC and User EXEC
PIM-DM Admin Mode This field indicates whether PIM-DM is enabled or disabled. This is a configured value.
Unit/Slot/Port Valid unit, slot and port number separated by forward slashes.
Interface Mode This field indicates whether PIM-DM is enabled or disabled on this interface. This is a
configured value.
State This field indicates the current state of PIM-DM on this interface. Possible values are
Operational or Non-Operational.
13.4.5 show ip pimdm interface
This command displays the interface information for PIM-DM on the specified interface.
▫ Format show ip pimdm interface
▫ Mode Privileged EXEC and User EXEC
Interface Mode This field indicates whether PIM-DM is enabled or disabled on the specified interface. This
is a configured value.
PIM-DM Interface Hello
Interval
This field indicates the frequency at which PIM hello messages are transmitted on this
interface. By default, the value is 30 seconds.
13.4.6 show ip pimdm interface stats
This command displays the statistical information for PIM-DM on the specified interface.