PLANET WGS3-24000 - Manual (Page 305)

305
4.7.6.4 PIM-SM Interface Summary
Figure 4-6-81 PIM-SM Interface Summary
Selection Criteria
o Slot/Port - Select the slot and port for which data is to be displayed. Slot 0 is the base unit.
Non-Configurable Data
o Mode - The administrative status of PIM-SM in the router: either enable or disable.
o IP Address - The IP address of the selected PIM interface.
o Net Mask - The network mask for the IP address of the selected PIM interface.
o Designated Router - The Designated Router on the selected PIM interface. For point-to- point interfaces, this object
has the value 0.0.0.0.
o Hello Interval - The frequency at which PIM Hello messages are transmitted on the selected interface.