TA Triumph-Adler DC 2020 - Manual (Page 72)

2. Use the cursor up or the cursor down key to select “Edit”.
Then press the Enter key.
3. Use the cursor up or the cursor down key to select “Delete”.
4. Press the Enter key.
* If there are no communications that are using the timer currently
in memory, an error message will appear and then the message
display will return to the “Edit” menu.
5. Use the cursor up or the cursor down key to select the document
number that corresponds to the communication you want to delete.
6. Press the Enter key. The selected communication will be deleted.
36. Select “End”.
37. Press the Enter key.
38. Select “End”.
39. Press the Enter key. If the Delayed Communication Report print
out setting is turned ON, a Delayed Communication Report will
be printed out. (Refer to page 6-2.)
2-18
Section 2 Various Functions of this Fax
Program/Change Broadcast:
End
➪ Broadcast List P P
TX Time :20:00
Program/Change Broadcast:
➪
End
Broadcast List P P
TX Time :20:00
(4) Deleting the Communication
You can delete a scheduled communication that is in memory and
waiting for a start time.
* You CANNOT delete a scheduled communication that is in memory
waiting to be forwarded to a destination fax.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Raise the cover plate and press the Information key.
The “Communication information” menu will appear in the
message display.
JUL-08-2001 12:00
Set Document
Communication information:
➪ Tx result on LCD
Rx result on LCD
Edit P P
Edit:
➪
Print
Immediate TX
Program/Change
Edit:
Immediate TX
Program/Change
➪
Delete
Delete: List
➪ Doc # :005
v :YDK P03
13:00 Broadcast
Delete: List
➪
Doc # :008
v :KRC P05
18:30 Send
08-JUL-2001 12:00
Set original
(Inch)
(Metric)
(Inch) (Metric)
Communication information:
➪
TX result display
RX result display
Edit P P
(Inch)
(Metric)
Edit:
➪ Print
Immediate transmission
Program/Change
(Inch)
(Metric)
Edit:
Immediate transmission
Program/Change
➪ Delete
(Inch)
(Metric)
Delete: list
➪
Doc. nr :005
v :YDK P03
13:00 Broadcast
(Inch)
(Metric)
Delete: list
➪
Doc. nr :008
v :KRC P05
18:30 Send
(Inch)
(Metric)
Broadcast List:
➪ End
Add destination
Change/Delete
Broadcast list:
➪ End
Add attention
Change/Delete
(Inch)
(Metric)