TA Triumph-Adler DC 2020 - Manual (Page 63)

2. Press the one-touch key (chain dial key) containing the chain dial
information you want to modify or delete.
3. Perform the following procedure that corresponds to what you
want to do:
> Modifying registered information
Use the cursor up or the cursor down key to select the information
you want to modify. Then press the Enter key.
* Follow the steps related to the desired information in
“(1) Registering”, page 2-8, to change that information.
> Deleting the chain dial key
1 Press the Stop/Clear key.
* If you want to cancel the deletion procedure, simply press the
Stop/Clear key again.
2 Press the Enter key.
4. If you are finished modifying and/or deleting chain dial keys,
press the Reset key. The operation panel will return to the initial
mode settings.
6. Press the Enter key.
7. Enter the desired name for the chain dial key.
* The name for the chain dial key can be up to 20 characters in
length. (Refer to “Entering characters”, page 1-30.)
8. Press the Enter key.
Registration of that chain dial key is complete.
> If you want to continue registering other chain dial keys, repeat
steps 4 - 8.
> If you are finished registering chain dial keys, press the Reset
key. The operation panel will return to the initial mode settings.
(2) Modifying and Deleting
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Perform steps 1 - 3 of “(1) Registering”, page 2-8.
2-9
Section 2 Various Functions of this Fax
Enter Chain Name
DDL-Chicago
(Lower case)
Enter Chain Name
JUL-08-2001 12:00
Set Document
Chain:
Press 1-Touch Key
Chain:05
End
v :0777
➪
DDL-Chicago
Chain:05
Deleted
Chain:05
Press ENTER key
Delete
Enter chain dial name
(Inch)
(Metric)
DDL-Chicago
(Small letter mode)
Enter chain dial name
(Inch)
(Metric)
08-JUL-2001 12:00
Set original
(Inch)
(Metric)
Chain:
Press one-touch key
(Inch)
(Metric)
(Inch) (Metric)