TA Triumph-Adler DC 2020 - Manual (Page 144)

6-4
Setting the Number of Rings
(Auto Fax Reception)
The number of times the fax will “ring” before an incoming call is
answered in the Auto Fax Reception mode can be set here to any
number between 1 - 15.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1.Raise the cover plate and press the Configure key.
2. Use the cursor up or the cursor down key to select “# of Rings”
[“Nr of rings”].
3. Press the Enter key.
4. Use the cursor up or the cursor down key to select the number of
“rings” before an incoming call is answered.
* The asterisk (*) in the message display indicates the current
setting.
5. Press the Enter key. The setting for the number of rings in the
Auto Fax Reception mode is complete.
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
Section 6 Various Settings and Registration in this Fax
# of Rings:
➪
1Times
*2Times
3Times
# of Rings:
3Times
4Times
➪
5Times
Set Fax:
Fax Forwarding:Off
Bulletin Board:Delete
➪ # of Rings : 2Times
Set Fax:
Fax Forwarding:Off
Bulletin Board:Delete
➪ # of Rings : 5Times
JUL-08-2001 12:00
Set Document
Set Fax:
End
➪
Line Type :Tone Dial
TTI :Outside P.
08-JUL-2001 12:00
Set original
Set fax:
Fax forwarding:Off
Bulletin board:Delete
➪
Nr of rings : 2Times
Nr of rings:
➪
1Times
*2Times
3Times
Nr of rings:
3Times
4Times
➪
5Times
Set fax:
Fax forwarding:Off
Bulletin board:Delete
➪
Nr of rings : 5Times
(Inch)
(Metric)
(Inch) (Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
Set fax:
End
➪ TTI :Outside p.
Print report P P
(Inch)
(Metric)