TA Triumph-Adler DC 2020 - Manual (Page 143)

6-3
Turning the Bulletin Board ON/OFF
If the Bulletin Board function is turned ON, you only need to enter
documents into memory once and they will be available for
transmission to any number of receiving parties upon receipt of their
polling request. To use the Bulletin Board function, it is necessary to
turn it ON in advance. (Refer to “(1) Polling Transmission”,
page 4-6.)
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Raise the cover plate and press the Configure key.
2. Use the cursor up or the cursor down key to select “Bulletin Board”.
3. Press the Enter key.
4. Use the cursor up or the cursor down key to select whether you
want to turn the Bulletin Board function ON or OFF.
* The asterisk (*) in the message display indicates the current
setting.
* If you want to turn the Bulletin Board function ON, select “Save
Doc. after TX” [“Save document after TX”]. Even after they are
transmitted, the documents will remain in memory waiting for the
next polling request.
If you want the documents to be deleted from memory after they
are transmitted, select “Del. Doc. after TX” [“Delete document
after TX”].
5. Press the Enter key.
The setting for the Bulletin Board function is complete.
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
Section 6 Various Settings and Registration in this Fax
Bulletin Board:
*Del. Doc. after TX
➪
Save Doc. after TX
Bulletin Board:
*Del. Doc. after TX
➪
Save Doc. after TX
Set Fax:
Password Check Comm. P P
Fax Forwarding:Off
➪ Bulletin Board:Delete
Set Fax:
Password Check Comm. P P
Fax Forwarding:Off
➪
Bulletin Board:Save
JUL-08-2001 12:00
Set Document
Set Fax:
End
➪ Line Type :Tone Dial
TTI :Outside P.
08-JUL-2001 12:00
Set original
Bulletin board:
*Delete document after TX
➪ Save document after TX
Bulletin board:
*Delete document after TX
➪
Save document after TX
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
Set fax:
End
➪
TTI :Outside p.
Print report P P
(Inch)
(Metric)