TA Triumph-Adler DC 2020 - Manual (Page 115)

4-33
Section 4 Other Features of this Fax
2 Press the Enter key.
* Follow the steps related to the desired information in
“(1) Registering”, page 4-28, to change that information.
3 Once the message display has returned to the same message
as in step
1 , press the cursor up key to select “End” and press
the Enter key.
> Deleting the program key
1 Press the Stop/Clear key.
* If you want to cancel the deletion procedure, simply press the
Stop/Clear key again.
2 Press the Enter key.
4. If you are finished modifying and/or deleting program keys,
press the Reset key. The operation panel will return to the initial
mode settings.
(3) Using a Program Key
1. If the operation involves the transmission of documents,
set the documents you want to transmit.
2. Press the desired one-touch key that was registered as a program
key.
* The fax will perform the communication operation according to the
registered data.
* If “Press " x " key.” [“Press X -key”] appears in the bottom line of the
message display, Dial Confirmation is turned ON. In this case,
check that the program displayed is actually the one desired.
> If the program IS the one desired, press the key on the keypad
that corresponds to the number indicated in the message display.
The operation will begin automatically.
> If the program is NOT the one desired, press the Reset key.
The operation panel will return to the initial mode settings.
ProgramKey:05:Broadcast
Deleted
ProgramKey:05:Broadcast
Press ENTER key
Delete JUL-08-2001 12:00
Document:8 1 / 2 x11
Enter Destination
v :M.S.G.
Document:8 1 / 2 x11
Press "5" key.
JUL-08-2001 12:00
Set Document
Program:05:Broadcast
Press ENTER key.
Delete
Program:05:Broadcast
Deleted
08-JUL-2001 12:00
Set original
08-JUL-2001 12:00
Document :A4
Enter destination
v :M.S.G.
Document :A4
Press 5-key
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch) (Metric)