TA Triumph-Adler DC 2020 - Manual (Page 11)

1-3
Section 1 Basic Use of this Fax
(2) Operation Panel Parts and their Functions
The following contains explanations on the names and functions of the keys and indicators
that are utilized when this machine is used as a facsimile. Refer to the Instruction
Handbook for your copier for information on the keys and indicators that are utilized when
this machine is used as a copier.
* Key and indicator names which are listed in brackets refer to those
names used in the metric version of this machine.
1 Message display…Operation procedures and indications of
trouble, etc., are shown in the message display.
2 Cursor left key…Press this key when you want to move the
cursor in the message display to the left.
3 Cursor right key…Press this key when you want to move the
cursor in the message display to the right.
4 Cursor down key…Press this key when you want to move the
cursor downward in the message display.
5 Cursor up key…Press this key when you want to move the
cursor upward in the message display.
6 Enter ( ) key…Press this key when you want to advance to the
next step in an operation or when you want to register the entered
data during setting and registration procedures.
7 Interrupt key & indicator…Press this key when you want to
interrupt a fax reception in order to make copies. The Interrupt
indicator will light when the machine is in the Interrupt mode.
8 Keypad…Use the keypad to enter fax numbers, etc.
* Even if your telephone service is for pulse dialing, press the star
( ) key after connecting to the other party and any key pressed
on the keypad after that will transmit the related tone signal.(inch
version only)
9 Reset key…Press this key when you want to cancel an operation
in progress and have the operation panel return to the initial
mode settings.
0 Stop/Clear key…Press this key when you want to revise data
that you have entered and return the message display to the
previous step. (The message display will NOT, however, return to
the previous step if the Enter key has already been pressed in
order to register that data.) Press this key also during registration,
modification or deletion procedures when you want to delete the
data that is currently displayed.
! Start key…Press this key when you want to initiate fax
transmission and manual fax reception.
@ COPY/FAX switching key / COPY & FAX indicators …Press
this key when you want to switch between the Copy Operation
and Fax Operation modes. When the COPY indicator is lit the
machine is in the Copy Operation mode and when the FAX
indicator is lit the machine is in the Fax Operation mode.
# Communication Error [ERROR] indicator…When this indicator
is lit, a communications error has occurred.
$ Communicating [COMMUNICATING] indicator…When this
indicator is lit, a fax communication is currently in progress. When
a separately purchased telephone is connected to this fax
machine, this indicator will flash while it’s being used.
% Document in Memory [MEMORY] indicator…When this
indicator is lit, there are documents in memory that are waiting to
be printed or communications that are waiting for their appointed
start time. When this indicator is flashing, documents are currently
being scanned or received into memory.
(Inch version)
(Center portion)
(Metric version)