TA Triumph-Adler DC 2020 - Manual (Page 16)

1-8
Section 1 Basic Use of this Fax
(3) Setting the Date and Time
Set the date and the time that will appear in the message display
here. BE SURE that the date and time that you set here are correct
since they will serve as a basis for all communications that use the
timer.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Checking the initial mode display
Check the message display to make sure that the operation
panel is in the initial mode for fax operation.
(Refer to “(2) Initial Mode”, page 1-14.)
* If the fax is not in the Fax Operation mode, press the
COPY/FAX switching key to light the FAX indicator.
Entering the “Program” mode
Raise the cover plate that is located over the one-touch keys
and press the Register key.
The “Program” menu will appear in the message display.
Scroll through the menu with the cursor up or the cursor down
key and select “Program Fax Parameter”.
1
2
3
JUL-07-2001 10:00
Set Document
Program:
End
➪
Program Abbreviated Dial
Program 1-Touch Key
Program:
Program encryption box
Program Encryption ID
➪
Program Fax Parameter P P
07-JUL-2001 10:00
Set original
Program:
End
➪ Program abbreviated dial
Program one-touch key
Program:
Encryp. code box regist.
Program encryption code
➪
Program fax parameter P P
Press the Enter key.
The setting for TTI Transmission is complete.
* To return to the initial mode settings, use the cursor up or the
cursor down key to select “End”. Then press the Enter key.
7
Set Fax:
End
Line Type :Tone Dial
➪
TTI :Inside P.
Selecting transmission and location
of the TTI information
Use the cursor up or the cursor down key to select whether or
not you want the TTI information to be sent and, if so, the
location where it will be printed.
* If you selected “Outside Page”, the TTI information will be
printed outside the border of the transmitted page.
6
TTI:
*Outside Page
➪
Inside Page
Do not Print
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch) (Metric)
(Inch) (Metric)
Set fax:
End
➪ TTI :Inside p.
Print report P P
(Inch)
(Metric)