TA Triumph-Adler DC 2020 - Manual (Page 152)

* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Raise the cover plate and press the Configure key.
2. Use the cursor up or the cursor down key to select “PaperFeed Sel.”
[“Paper feed sel”].
6-12
Selecting the Paper Feed Selection Mode
Select here among the 3 available modes for feeding paper when
printing out all documents that are received when the fax is in the
Fax Operation mode – as well as for printing out reports and lists:
the Auto Selection mode, the Fixed Size mode or the Fixed Cassette
mode.
* This setting CANNOT be changed while there are documents
remaining in memory.
3. Press the Enter key.
4. Use the cursor up or the cursor down key to select the desired
paper feed mode.
* The asterisk (*) in the message display indicates the current
setting.
> If you selected “Auto Selection”…
Proceed to step 5.
> If you selected “Fix Size” [“Fixed size”]…
1 Press the Enter key.
2 Use the cursor up or the cursor down key to select the desired
paper size.
> If you selected “Fix Cassette” [“Fixed cassette”]…
1 Press the Enter key.
2 Use the cursor up or the cursor down key to select the desired
drawer.
* If the selected drawer is not installed, a message will be
displayed indicating that the drawer is not available and use of
that drawer will not be possible.
5. Press the Enter key.
The setting for Paper Feed Selection is complete.
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
Section 6 Various Settings and Registration in this Fax
Set Fax:
Receive Mode :Fax Recept
RX Date/Time :Off
➪ PaperFeed Sel.:AutoSelect
JUL-08-2001 12:00
Set Document
Set Fax:
End
➪
Line Type :Tone Dial
TTI :Outside P.
In this mode, the fax will automatically select and feed the most
appropriate paper.
In this mode, paper feed will be accomplished from the drawer that
contains the selected size of paper. If there is no paper of the
selected size in any drawer, the documents will be received directly
into memory.
* You CANNOT select more than one size of paper in this setting.
* If the same size of paper is set in more than one location,
the upper drawer will have priority for paper feed.
In this mode, paper feed will be accomplished from a specified
drawer regardless of the size of the received documents.
If there is no paper in the selected drawer, the documents will be
received directly into memory.
* You CANNOT select more than one drawer in this setting.
08-JUL-2001 12:00
Set original
Set fax:
Reception mode:Fax recept
RX date/time :Off
➪
Paper feed sel:Auto sel.
PaperFeed Sel.:
➪ *Auto Selection
Fix Size P P
Fix Cassette P P
Fix Size:
➪
11x17
8 1 / 2 x11, 11x8 1 / 2
8 1 / 2 x14
Fix Cassette:
➪
Upper Cassette
2nd. Cassette
3rd. Cassette
Set Fax:
Receive Mode :Fax Recept
RX Date/Time :Off
➪
PaperFeed Sel.:2nd. Cass.
Paper feed sel:
➪
*Auto selection
Fixed size P P
Fixed cassette P P
Fixed size:
➪ A3
B4
A4
Fixed cassette:
➪
Top drawer
2nd drawer
3rd drawer
Set fax:
Reception mode:Fax recept
RX date/time :Off
➪ Paper feed sel:2nd drawer
(Inch)
(Metric)
(Inch) (Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
Set fax:
End
➪
TTI :Outside p.
Print report P P