TA Triumph-Adler DC 2020 - Manual (Page 150)

6-10
Selecting the Reception Mode
This fax has 5 reception modes [4 modes in the metric version].
However, except for Manual Fax Reception and TAD Reception, it is
necessary to select the desired mode in advance in order to use any
of the other reception modes (Automatic Fax Reception, Auto
FAX/TEL Switching and D.R.D. Reception [D.R.D. Reception is
available in the inch version only]).
* Refer to “Manual Fax Reception”, page 2-20, and “TAD Reception”,
page 4-3, for information on selecting these two modes.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Raise the cover plate and press the Configure key.
2. Use the cursor up or the cursor down key to select “Receive Mode”.
3. Press the Enter key.
4. Use the cursor up or the cursor down key to select the desired
reception mode.
* The asterisk (*) in the message display indicates the current
setting.
> Metric version: Proceed to step 7.
> Inch version and “D.R.D.” was selected: Proceed to step 5.
> Inch version and any reception mode other than D.R.D. was
selected: Proceed to step 7.
5. Press the Enter key.
6. Use the cursor up or the cursor down key to select the desired ring
pattern.
* Select among the 4 available patterns: “Normal Ring”,
“Double Ring”, “Short-Short-Long” and “Short-Long-Short”
7. Press the Enter key. The setting for the reception mode is complete.
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
Section 6 Various Settings and Registration in this Fax
Set Fax:
End
➪
Line Type :Tone Dial
TTI :Outside P.
JUL-08-2001 12:00
Set Document
Receive Mode:
➪
*Fax Reception
Auto Fax/Tel SW
D.R.D. P P
D.R.D. Ring Pattern:
➪
Normal Ring
Double Ring
Short-Short-Long
Set Fax:
Scan from ADF :Std size
TX Mode/Default:Memory Tr
➪
Receive Mode :Fax Recept
08-JUL-2001 12:00
Set original
Set fax:
DF scanning :Std. orig.
TX mode/Default:Memory Tr
➪
Reception mode:Fax recept
Reception mode:
*Fax reception
➪ Auto Fax/Tel switching
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch) (Metric)
Set fax:
End
➪
TTI :Outside p.
Print report P P