TA Triumph-Adler DC 2020 - Manual (Page 151)

6-11
Turning Reception Date & Time Print
Out ON/OFF
Select here whether or not you want information - such as the time of
the reception, information related to the transmitting party and the
number of pages transmitted - to be printed out at the top edge of
received documents. This information is convenient for checking the
actual time you received documents, especially when they were sent
from a location that is in a different time zone than you are. In order
to have this information printed out, it is necessary to turn this
function ON in advance.
* If a received page is split and printed onto 2 or more separate
sheets of paper, the time and date of reception will be printed only
on the first of those sheets.
* If Fax Forwarding is turned ON, the true date and time of reception
at this fax will not be printed out on the documents received at the
selected destination. If, however, the forwarding operation is
unsuccessful even after redialing the predetermined number of
times, the reception date and time information WILL be displayed on
the documents that will then be automatically printed out at this fax.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Raise the cover plate and press the Configure key.
2. Use the cursor up or the cursor down key to select “Rx Date/Time”.
3. Press the Enter key.
4. Use the cursor up or the cursor down key to select whether you
want to turn Reception Date and Time Print Out ON or OFF.
* The asterisk (*) in the message display indicates the current
setting.
* If you want the reception date and time to be printed out, select “On”.
5. Press the Enter key.
The setting for the reception date and time print out is complete.
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
Section 6 Various Settings and Registration in this Fax
Rx Date/Time:
➪
On
*Off
Set Fax:
TX Mode/Default:Memory Tr
Receive Mode :Fax Recept
➪ Rx Date/Time :On
Set Fax:
TX Mode/Default :Memory Tr
Receive Mode :Fax Recept
➪
Rx Date/Time :Off
Set Fax:
End
➪ Line Type :Tone Dial
TTI :Outside P.
JUL-08-2001 12:00
Set Document
08-JUL-2001 12:00
Set original
Set fax:
TX mode/Default:Memory Tr
Reception mode:Fax recept
➪ RX date/time :Off
Set fax:
TX mode/Default:Memory Tr
Reception mode:Fax recept
➪
RX date/time :On
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch) (Metric)
Set fax:
End
➪ TTI :Outside p.
Print report P P