TA Triumph-Adler DC 2020 - Manual (Page 59)

2-5
Section 2 Various Functions of this Fax
Broadcast Transmission
Broadcast Transmission allows the same documents to be
transmitted to a number of destinations one after another,
in a single operation. If, for example, you want to transmit the
same documents from a central office to multiple branch offices,
this function is quite convenient as it only requires you to
perform the transmission operation one time.
The documents you want to transmit are first entered in
memory, and dialing and transmitting operations are repeated
automatically for each destination. * If you enter all of the destination numbers using abbreviated
numbers, one-touch keys or group dial keys, this fax can
automatically transmit the same documents to up to 132
different destinations in a single operation.
* During a Broadcast Transmission, documents will be
transmitted using the Memory Transmission mode even if the
fax is currently in the Direct Feed Transmission mode.
* When you want to transmit duplex (2-sided) documents, press
the Duplex Tx. key at any point in the procedure PRIOR to
entering the last destination fax number.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Set the documents you want to transmit in the DF or on the platen.
* When the documents are set on the platen, it is necessary,
after each page is scanned, to select whether or not you want to
transmit more pages. (Refer to page 1-25.)
2. Raise the cover plate and press the Broadcast key.
3. Enter a destination fax number.
* You can enter the fax number using the keypad, abbreviated
numbers, one-touch keys, group dial keys or the directory.
Chain dial keys can be used as well.
JUL-08-2001 12:00
Set Document
JUL-08-2001 12:00
Document:8 1 / 2 x11
Enter Destination
v :1358
Document:8 1 / 2 x11
Enter Destination
08-JUL-2001 12:00
Set original
(Inch)
(Metric)
08-JUL-2001 12:00
Document :A4
Enter destination
(Inch) (Metric)
v :1358
Document :A4
Enter destination
(Inch)
(Metric)
(Inch)
(Metric)