TA Triumph-Adler DC 2020 - Manual (Page 102)

4-20
Section 4 Other Features of this Fax
5. Use the keypad to enter the appropriate subaddress.
* This subaddress is required during an F-Code Based
Communication in order to designate the box in the relay
station’s fax. It can be up to 20 digits in length and can include
any combination of the numerals 0 - 9.
6. Press the Enter key.
7. If necessary, enter the predetermined F-Code password.
* This password is used during an F-Code Based Communication,
but is not required if you agree in advance with the destination
party not to use one.
> The password can be up to 20 digits in length and can include
any combination of the numerals 0 - 9 and the symbols “ ”
and “#”.
> If you DO NOT need to enter an F-Code password, proceed to
step 8.
8. Proceed to the appropriate step as indicated below:
> If you pressed the Delayed Tx. key in step 2, proceed to step 9.
> If you DID NOT press the Delayed Tx. key, proceed to step 11.
9. Press the Enter key.
10. Use the keypad to enter the desired time for the transmission to
begin.
* If you want to reset the displayed time to “00:00”, simply press
the Stop/Clear key.
11. Press the Enter key. The transmission operation will begin.
* If a time for the transmission to begin was designated, the
transmission operation will begin when the appointed time is
reached.
SubAddress:
6635
20 Digits
Enter SubAddress.
Subaddress:
6635
20 Digits
Enter subaddress numbers
Password:
20 Digits
Enter Your Password
(10) Printing Out an F-Code Based Relay Box List
Print out this list in order to check the information in each F-Code
Based Relay Box as well as data regarding the existence of
documents in each respective box.
* If there are no F-Code Based Relay Boxes registered in this fax, an
F-Code Based Relay Box List will not be printed out.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode
settings.
1. Raise the cover plate and press the Print Reports key.
The “Print Report” menu will appear in the message display.
2. Use the cursor up or the cursor down key to select “Subaddress
box list”.
3. Press the Enter key.
4. Use the cursor up or the cursor down key to select “Subadd. relay
box list” [“Subaddr. relay box list”].
5. Press the Enter key.
An F-Code Based Relay Box List will be printed out.
* The operation panel will return to the initial mode settings.
* If there are no F-Code Based Relay Boxes registered in this fax,
an error message will be displayed before the operation panel
returns to the initial mode settings.
TX Time:20:00
Enter TX Time
TX time:20:00
Enter transmission time
JUL-08-2001 12:00
Set Document
08-JUL-2001 12:00
Set original
Print Report:
➪
Activity Report
Confirmation Report
User Setting List
Print Report:
Confirmation Report
User Setting List
➪ Subaddress box list P P
Subaddress box list:
➪ Subadd. confi. box list
Subadd. relay box list
Subaddress box list:
➪
Subad. confid. box list
Subaddr. relay box list
Subaddress box list:
Subadd. confi. box list
➪ Subadd. relay box list
Subaddress box list:
Subad. confid. box list
➪
Subaddr. relay box list
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch) (Metric)