TA Triumph-Adler DC 2020 - Manual (Page 62)

3. Press the Enter key.
4. Press an unregistered one-touch key.
5. Use the keypad to enter the desired chain dial number.
* The chain dial number can be up to 32 digits in length.
2-8
Section 2 Various Functions of this Fax
(1) Registering
* You can register any number of the 32 one-touch keys for use as
chain dial keys.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode
settings.
1. Raise the cover plate and press the Register key.
The “Program” menu will appear in the message display.
2. Use the cursor up or the cursor down key to select
“Program Chain Dial”.
Chain Dial Keys
If you register a chain dial number under a one-touch key in
advance, that one-touch key will function as a chain dial key and
the chain dial key can be used to enter the initial portion of the
other party’s fax number. * You can only use chain dial keys once in a dialing sequence:
to enter the initial digits of the other party’s fax number.
* You can use chain dial keys when entering destination fax
numbers in each of the various types of fax communication
available in this fax such as Broadcast Transmission.
* You CANNOT use chain dial keys in combination with group
dial keys.
Program:
Program Program Key
Program Group Key
➪ Program Chain Dial
Chain:
Press 1-Touch Key
v :0777
Enter Fax No.
v :
Enter Fax No.
JUL-08-2001 12:00
Set Document
Program:
End
➪ Program Abbreviated Dial
Program 1-Touch Key
Program:
End
➪
Program abbreviated dial
Program one-touch key
08-JUL-2001 12:00
Set original
Chain:
Press one-touch key (Inch)
(Metric)
(Inch) (Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch) (Metric)
v :
Enter fax number
(Inch)
(Metric)
v :0777
Enter fax number
(Inch)
(Metric)