TA Triumph-Adler DC 2020 - Manual (Page 57)

5. Use the cursor up or the cursor down key to select whether or not
you want to include a cover page with the transmission.
> If you want to include a 1-sided page as a cover sheet, select
“Yes”. In this case, the fax will first transmit only the front side
of the first page of the documents PRIOR to transmitting the
2-sided documents.
> If you only want to transmit the 2-sided documents, select “No”.
6. Press the Enter key.
7. Use the cursor up or the cursor down key to select whether or not
you want the data for the rear side of the documents to be inverted
to match the orientation of the front side during transmission.
> If you set the documents as shown in the illustration immediately
below, select “On”. The fax will then invert the image of the rear
side of each document in memory 180°.
> If you set the documents as shown in the illustration below,
select “Off”.
8. Press the Enter key. The documents will be scanned into memory
and the transmission operation will begin automatically.
2-3
Section 2 Various Functions of this Fax
Rotate back side image:
➪
On
Off
(Direction of document feed)
destination fax>
(Direction of document feed)
destination fax>
Top binding:
➪
On
Off
(Inch)
(Metric)