TA Triumph-Adler DC 2020 - Manual (Page 10)

1-2
Section 1 Basic Use of this Fax
1 RADF (Reversing Automatic Document Feeder)
[option]…Documents will be automatically fed one by one onto
the platen for scanning. Duplex (2-sided) documents will be
flipped over automatically for scanning the back side as well.
2 Original table…Set the documents you want to transmit on this
table. Up to 70 sheets of up to 8 1/2 " x 11" [A4] size plain paper
(8 1/2 " x 14" [B4] or 11" x 17" [A3] : up to 50 sheets) can be set at
one time.
3 Original insert guides…Adjust these guides to match the width
of the documents.
4 Left cover…Open this cover when a document jams.
5 Top cover…Documents are ejected onto this cover after being
scanned.
6 Eject guide…Open this guide when transmitting documents of a
large size such as 8 1/2 " x 14" [B4] or 11" x 17" [A3].
7 DF open/close lever…Operate this lever when opening and
closing the DF.
8 Original set indicator…This indicator indicates the status of the
documents set in the DF. Documents are set properly when the
indicator is lit green.
9 Operation panel…Use the operation panel to perform the
procedures required for fax communication.
0 Cover plate…This plate can be raised or lowered by grasping the
tab in order to access the desired one-touch key number. Raise
this plate as well in order to use the various “function” keys
(Broadcast [BROADCAST] key, etc.).
! Copy store section…Received documents are ejected and
stored face-down in the copy store section. Up to 250 sheets of
plain paper (75 g/m
2 - 80 g/m 2 ) can be stored in this section.
@ Drawers…This fax machine comes standard with two drawers
installed. Each drawer can hold up to 250 sheets of plain paper
(75 g/m
2 - 80 g/m 2 ). The Multi-Bypass can be used as well to feed
paper. Refer to the Instruction Handbook for your copier for more
detailed information regarding the use of tqhe drawers and the
Multi-Bypass.
# Telephone jack (T)…Use this jack when connecting a separately
purchased telephone to the fax.
[NOTE] This jack is not available in the Netherlands or in lreland.
$ Line jack (L)…Use those jacks to connect the fax to a telephone
line using the modular cord.
% ADF (Automatic Document Feeder) [option]…Documents will
be automatically fed one by one onto the platen for scanning.
^ Main switch…Turn this switch ON ( | ) in order to perform fax
and copy operations. The message display will light and
operation will be possible.
Names of Parts
(1) Main Body Parts and their Functions
The following contains information on the names and functions of the
parts that are required when this machine is used as a facsimile. Refer to
the Instruction Handbook for your copier for information on other parts of
this machine.