TA Triumph-Adler DC 2020 User Manual
Page 60
2-6
Section 2 Various Functions of this Fax
4. If you want to designate the communication for this fax number as
an F-Code Based Communication, press the F-Code [SUBADDRESS]
key.
> If you pressed the F-Code [SUBADDRESS] key, proceed to
step 5.
> If you DID NOT press the F-Code [SUBADDRESS] key, proceed
to step 8.
5. Enter the subaddress you want to use for this F-Code Based
Communication.
* The subaddress can be up to 20 digits in length and can include
any combination of the numerals 0 - 9.
6. Press the Enter key.
7. If necessary, enter the predetermined F-Code password.
* The password can be up to 20 digits in length and can include
any combination of the numerals 0 - 9 and the symbols “
” and
“#”. You do not have to enter an F-Code password here if you
agree in advance with the destination party not to use one.
* If you DO NOT need to enter an F-Code password, proceed to
step 8.
8. Press the Enter key.
* If the fax number you entered has already been registered for
this operation or too many numbers were entered, an error
message will appear in the message display. In this case,
press the Enter key and the message display will return to a
display that allows you to enter the destination fax number again.
9. Select whether or not you want to continue entering other
destination fax numbers.
> If you DO want to enter more fax numbers, return to step 3 on
page 2-5.
> If you are finished entering fax numbers, proceed to step 10.
10. If you want to designate a time for the transmission to begin,
press the Delayed Tx. key.
* If the maximum allowable number of communications that use
the timer (max: 50) is reached, an error message will appear in
the message display. In this case, press the Enter key and the
operation panel will return to the initial mode settings.
* If you want the transmission to begin right away, this step is not
necessary. Proceed to step 13.
11. Press the Enter key.
12. Use the keypad to enter the desired time for the transmission to
begin.
* If you want to reset the displayed time to “00:00”, simply press
the Stop/Clear key.
13. Press the Enter key. The documents will be scanned into
memory and the transmission operation will begin automatically.
* If a time for the transmission to begin was designated,
the transmission operation will begin when the appointed time is
reached.
SubAddress:
66385
20 Digits
Enter SubAddress.
Password:
20 Digits
Enter Your Password
Password:
38566
20 Digits
Enter Your Password
v :
Document:8
1
/
2
x11
Enter Destination
TX Time:20:00
Enter TX Time
●
If you are going to designate this fax number for as
an F-Code Based Transmission…
• You CAN enter the same destination fax number more than
once as long as the destination F-Code Boxes are different.
• If you enter both fax numbers with the keypad, you CAN enter
the same destination fax number as one that has already been
entered (as long as one number was designated for F-Code
Based Transmission and the other was NOT).
• If you entered one fax number with the keypad and designate it
for F-Code Based Transmission, you CAN enter the same
destination fax number as long as you use an abbreviated
number or one-touch key that was designated for F-Code
Based Communication for the other number.
• You CAN enter the same destination fax number more than
once as long as you enter the number with different abbreviated
numbers or one-touch keys that were designated for F-Code
Based Communication.
Subaddress:
66385
20 digits
Enter subaddress numbers
(Inch)
(Metric)
v :
Document :A4
Enter destination
(Inch)
(Metric)
(Inch)
(Metric)
TX time:20:00
Enter transmission time
(Inch)
(Metric)