TA Triumph-Adler DC 2020 - Manual (Page 70)

2-16
Section 2 Various Functions of this Fax
11. Press the Enter key.
12. Enter the additional fax number.
13. If you want to designate the communication for this fax number
as an F-Code Based Communication, press the F-Code
[SUBADDRESS] key.
* If you DID NOT press the F-Code [SABADDRESS] key,
proceed to step 16.
14. Enter the subaddress you want to use for this F-Code Based
Communication. Then press the Enter key.
* The subaddress can be up to 20 digits in length and can
include any combination of the numerals 0 - 9.
15. If necessary, enter the predetermined F-Code password.
* The password can be up to 20 digits in length and can include
any combination of the numerals 0 - 9 and the symbols “ ”
and “#”.
* If you DO NOT need to enter an F-Code password, proceed to
step 16.
v :
Enter Fax No.
v :55367
Enter Fax No.
SubAddress:
66385
20 Digits
Enter SubAddress.
Password:
3856
20 Digits
Enter Your Password
v :
Enter fax number
(Inch)
(Metric)
v :55367
Enter fax number
(Inch)
(Metric)
(Inch) (Metric)
Subaddress:
66385
20 digits
Enter subaddress numbers
(Inch)
(Metric)
16. Press the Enter key.
* If the fax number you entered has already been registered for
this operation, an error message will appear in the message
display. In this case, press the Enter key and then proceed to
step 17.
* If you have entered too many fax numbers, an error message
will appear in the message display. In this case, press the Enter
key and then proceed to step 18.
17. Select whether or not you want to continue adding fax numbers.
> If you DO want to add more fax numbers, return to step 12.
> If you are finished adding fax numbers, proceed to step 18.
18. Press the Enter key.
* If you are finished modifying the contents of the communication,
proceed to step 36 on page 2-18.
● Deleting fax numbers
19. Use the cursor up or the cursor down key to select “Change/Delete”.
20. Press the Enter key.
21. Use the cursor up or the cursor down key to select the fax
number you want to delete.
* If you DO NOT want to delete fax numbers, proceed to step 23
on page 2-17.
22. Press the Stop/Clear key. The selected fax number will be
deleted from this communication.
* If you want to continue deleting other fax numbers, repeat
steps 21 and 22 until all desired numbers have been deleted.
* If you are finished modifying the contents of the communication,
proceed to step 34 on page 2-17.
Broadcast List:
End
Add destination
➪ Change/Delete
v :
Enter Fax No.
Change/Delete Broadcast:
End
➪ v :OSS
v :OKS
Change/Delete Broadcast:
v :SDS
➪ v :TMS
v :NGYS
Change/Delete Broadcast:
v :SDS
➪ v :NGYS
v :HSS
v :
Enter fax number
(Inch)
(Metric)
Broadcast list:
End
Add attention
➪ Change/Delete
(Inch)
(Metric)