TA Triumph-Adler DC 2020 - Manual (Page 138)

5-2
Section 5 Managing Information About Your Fax Communications
(1) Transmission result display
Information for up to 10 of the most recent fax transmissions can be
checked in the message display.
1. Raise the cover plate and press the Information key.
The “Communication information” menu will appear in the
message display.
2. Make sure that “Tx result on LCD” [“TX result display”] is selected
in the message display and press the Enter key. Information for
the most recent transmission will be displayed.
3. Pressing the cursor down key will display the next previous
transmission and pressing the cursor up key will change the
display back towards the most recent transmission.
4. Once you have finished checking the desired information,
press the Enter key.
The operation panel will return to the initial mode settings.
* If you press the cursor down key when the information for the
“oldest” transmission is displayed, an exit menu will be displayed.
If this happens, press the Enter key.
The operation panel will return to the initial mode settings.
(2) Reception result display
Information for up to 10 of the most recent fax receptions can be
checked in the message display.
1. Raise the cover plate and press the Information key.
The “Communication information” menu will appear in the
message display.
2. Use the cursor up or the cursor down key to select “Rx result on
LCD” [“RX result display”].
3. Press the Enter key.
Information for the most recent reception will be displayed.
4. Pressing the cursor down key will display the previous reception
and pressing the cursor up key will change the display back
towards the most recent reception.
5. Once you have finished checking the desired information, press
the Enter key.
The operation panel will return to the initial mode settings.
* If you press the cursor down key when the information for the
“oldest” reception is displayed, an exit menu will be displayed.
If this happens, press the Enter key.
The operation panel will return to the initial mode settings.
Communication Result Display
TX Transaction:
➪
Doc # :010 JUL_08 24:00
v :0123456789 P05
Send OK
RX Transaction:
➪ Doc # :010 JUL 08 24:00
v :0123456789 P05
Receive OK
Communication information:
➪
Tx result on LCD
Rx result on LCD
Edit P P
Communication information:
➪ Tx result on LCD
Rx result on LCD
Edit P P
Communication information:
Tx result on LCD
➪
Rx result on LCD
Edit P P
You can use the message display to check certain information regarding the 10 most
recent fax transmissions and/or receptions. The communication result display lets you
check the document number, date and time, destination name, number of pages,
type of communication and the result of your communication.
(Inch) (Metric)
Communication information:
➪ TX result display
RX result display
Edit P P
TX transaction:
➪ Doc. nr :010 JUL_08 24:00
v :0123456789 P05
Send OK
Communication information:
➪
TX result display
RX result display
Edit P P
Communication information:
TX result display
➪
RX result display
Edit P P
RX Transaction:
➪
Doc. nr :010 JUL 08 24:00
v :0123456789 P05
Receive OK
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)