TA Triumph-Adler DC 2020 - Manual (Page 114)

4-32
Section 4 Other Features of this Fax
14. Enter the subaddress you want to use for this F-Code Based
Reception.
* The subaddress can be up to 20 digits in length and can
include any combination of the numerals 0 - 9.
15. Press the Enter key.
16. If necessary, enter the predetermined F-Code password.
* The password can be up to 20 digits in length and can include
any combination of the numerals 0 - 9 and the symbols “ ”
and “#”. You do not have to enter an F-Code password here if
you agree in advance with the transmitting party not to use one.
* If you DO NOT need to enter an F-Code password, proceed to
step 17.
17. Press the Enter key.
* If the fax number you entered has already been registered for
this operation or too many numbers were entered, an error
message will appear in the message display. In this case,
press the Enter key and the message display will return to a
display that allows you to enter the transmitting party’s fax
number again.
18. Select whether or not you want to continue entering other
transmitting fax numbers.
> If you DO want to enter more fax numbers, return to step 12 on
page 4-31.
> If you are finished entering fax numbers, proceed to step 19.
19. Press the Enter key.
20. Enter a name for the program.
* The program name can be up to 20 characters in length.
(Refer to “Entering characters”, page 1-30.)
SDL-G
Enter Program Name
21. Press the Enter key. The entered information will become
registered under the designated program key.
> If you want to continue registering other program keys,
return to step 4, page 4-29.
> If you are finished registering program keys, press the Reset
key. The operation panel will return to the initial mode settings.
(2) Modifying and Deleting
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Perform steps 1 - 3 of “(1) Registering”, page 4-28.
2. Press the one-touch key (program key) containing the program
you want to modify or delete.
3. Perform the following procedure that corresponds to what you
want to do:
> Modifying registered information
1 Use the cursor up or the cursor down key to select the
information you want to modify.
SubAddress:
6635
20 Digits
Enter SubAddress.
Password:
20 Digits
Enter Your Password
Password:
3856
20 Digits
Enter Your Password
v :
Enter Fax No.
ProgramKey:
Press 1-Touch Key
JUL-08-2001 12:00
Set Document
ProgramKey:05:Broadcast
End
➪
Broadcast List P P
M.S.G.
ProgramKey:05:Broadcast
End
Broadcast List P P
➪
M.S.G.
08-JUL-2001 12:00
Set original
Program:
Press one-touch key
Program:05:Broadcast
End
➪ Broadcast list P P
M.S.G.
Program:05:Broadcast
End
Broadcast list P P
➪ M.S.G.
Subaddress:
6635
20 digits
Enter subaddress numbers
v :
Enter fax number
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch) (Metric)