TA Triumph-Adler DC 2020 - Manual (Page 18)

1-10
Section 1 Basic Use of this Fax
Press the Enter key again.
5
v :_
20 Digits
Enter Fax No.
v :_
20 digits
Enter fax number
Entering the “Program” mode
Raise the cover plate that is located over the one-touch keys
and press the Register key.
The “Program” menu will appear in the message display.
Scroll through the menu with the cursor up or the cursor down
key and select “Program Fax Parameter”.
Press the Enter key. The “Program Fax Parameter” menu will
appear in the message display.
2
3
4
Program:
End
➪
Program Abbreviated Dial
Program 1-Touch Key
Program:
Program encryption box
Program Encryption ID
➪
Program Fax Parameter P P
Program Fax Parameter:
End
➪ v :
Own Name :
Program:
End
➪ Program abbreviated dial
Program one-touch key
Program:
Encryp. code box regist.
Program encryption code
➪
Program fax parameter P P
1 Registering your fax number
* Use the following procedure as well when you want to
change information that is already registered.
* If you want to cancel the procedure part way through,
press the Reset key. The operation panel will return to the
initial mode settings.
Checking the initial mode display
Check the message display to make sure that the operation
panel is in the initial mode for fax operation.
(Refer to “(2) Initial Mode”, page 1-14.)
* If the fax is not in the Fax Operation mode, press the
COPY/FAX switching key to light the FAX indicator.
(4) Registering Your Self-Station Information
If you register information identifying your station (fax number,
station name and station ID) here, it can be sent to the receiving
party’s fax and printed on the received documents, thereby instantly
notifying that party of the source of the fax transmission.
1
JUL-08-2001 12:00
Set Document
08-JUL-2001 12:00
Set original
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch) (Metric)
(Inch) (Metric)
(Inch) (Metric)