beautypg.com

Working environment – RIGOL DS6000 Series User Manual

Page 9

background image

RIGOL

DS6000 User’s Guide

VII

Working Environment


Temperature
Operating: 0℃ to +50℃
Non-operating: -20℃ to +70℃

Humidity
Under +35℃: ≤90% relative humidity
+35℃ to +40℃: ≤60% relative humidity

WARNING

To avoid short circuit inside the instrument or electric shock, please do not
operate in humid environment.


Altitude
Operating: less than 3 km
Non-operating: less than 15 km

Installation (overvoltage) Category
This product is powered by MAINS conforming to installation (overvoltage) category
II.

WARNING

Make sure that no overvoltage (such as that caused by thunderbolt) can
reach the product, or else the operator might expose to danger of electric
shock.


Installation (overvoltage) Category Definitions
Installation (overvoltage) category I refers to signal level which is applicable to
equipment measurement terminals connected to the source circuit. In these
terminals, precautions are done to limit the transient voltage to the corresponding
low level.
Installation (overvoltage) category II refers to the local power distribution level
which is applicable to equipment connected to the AC line

(AC power).