RIGOL DS6000 Series - Manual (Page 105)

5 To Trigger the Oscilloscope RIGOL
DS6000 User’s Guide 5-13
The adjustment mode of the trigger level is different when different vertical window
is selected:

: only adjust the upper limit of the trigger level. During the adjustment, the
“UP Level” and the “Slew Rate” change accordingly but the “Low Level” remains
unchanged.

: only adjust the lower limit of the trigger level. During the adjustment, the
“Low Level” and the “Slew Rate” change accordingly but the “UP Level” remains
unchanged.

: adjust the upper and lower limits of the trigger level at the same time.
During the adjustment, the “UP Level” and the “Low Level” change accordingly
but the “Slew Rate” remains unchanged.
Trigger Mode:
Press Sweep to select the Trigger Mode (page 5-3) under this trigger type as auto,
normal or single. The corresponding status light of the current trigger mode turns on.
Trigger Setting:
Press Setting to set the trigger parameters (trigger holdoff) under this trigger type.