RIGOL DS6000 Series User Manual

Rigol, User’s guide, Ds6000 series digital oscilloscope

RIGOL

User’s Guide

DS6000 Series Digital Oscilloscope

Aug. 2012

RIGOL Technologies, Inc.

Table of contents

Document Outline

Guaranty and Declaration
Safety Requirement
- General Safety Summary
- Safety Terms and Symbols
- Measurement Category
- Ventilation Requirement
- Working Environment
- General Care and Cleaning
- Environmental Considerations
DS6000 Series Overview
Document Overview
Quick Start
- General Inspection
- Appearance and Dimensions
- To Prepare the Oscilloscope for Use
- Front Panel Overview
- Rear Panel Overview
- Front Panel Function Overview
- User Interface
- To Use the Security Lock
- To Use the Desk Mount Instrument Arm
- To Use the Rack Mount Kit
- To Use the Built-in Help System
To Set the Vertical System
- To Enable the Channel
- Channel Coupling
- Bandwidth Limit
- Probe
- Input Impedance
- Waveform Invert
- Vertical Scale
- Vertical Expansion
- Amplitude Unit
- Channel Label
- Delay Calibration
To Set the Horizontal System
- Delayed Sweep
- Time Base Mode
- Horizontal Scale
- Horizontal Reference
To Set the Sample System
- Acquisition Mode
- Sample Mode
  - Real-time Sample
  - Equivalent Sample
- Sample Rate
- Memory Depth
- Antialiasing
To Trigger the Oscilloscope
- Trigger Source
- Trigger Mode
- Trigger Coupling
- Trigger Holdoff
- Trigger Type
- Trigger Ouput Connector
To Make Measurements
- Math Operation
- Auto Measurement
- Cursor Measurement
Protocol Decoding
- Parallel Decoding
- RS232 Decoding (Option)
- I2C Decoding (Option)
- SPI Decoding (Option)
- CAN Decoding (Option)
- FlexRay Decoding (Option)
Reference Waveform
- To Enable REF Function
- To Set the Color
- To Select REF Source
- To Save to Internal Memory
- To Adjust REF Waveform Display
- To Export to Internal or External Memory
- To Import from Internal or External Memory
Pass/Fail Test
- To Enable Pass/Fail Test Function
- To Select Source
- Mask Range
- Test and Output
- To Save the Test Mask
- To Load the Test Mask
Waveform Recording
- Waveform Recording
- Waveform Playback
- Waveform Analysis
  - Analysis Based on Trace
  - Analysis Based on Pass/Fail Mask
Display Control
- To Select the Display Type
- To Set the Persistence Time
- To set the Waveform Brightness
- To Set the Screen Grid
- To Set the Grid Brightness
- To Set the Menu Display
Store and Recall
- Storage System
- Storage Type
- Internal Store and Recall
- External Store and Recall
- Disk Management
- Factory
System Function Setting
- Remote Interface Configuration
- System-related
- To Print the Waveform
Remote Control
- Remote Control via USB
- Remote Control via LAN
- Remote Control via GPIB
Troubleshooting
Specifications
Appendix
- Appendix A: Options and Accessories
- Appendix B: Warranty
- Appendix C: Any Question or Comment?
Index