RIGOL DS6000 Series - Manual (Page 48)

RIGOL 1 Quick Start
DS6000 User’s Guide 1-26
10. Trigger Source
Display the trigger source currently selected (CH1-CH4, EXT, EXT/5 or AC
Line). Different labels are displayed when different trigger sources are
selected and the color of the trigger parameter area will change accordingly.
For example, denotes that CH1 is selected as the trigger source.
11. Trigger Level
 at the right of the screen is the trigger level label and the trigger
level value is displayed at the upper-right corner of the screen.
 When Using TRIGGER LEVEL to modify the trigger level, the
trigger level value will change with the up and down of .
Note: in slope trigger, there are two trigger level labels ( and ). For
detailed information, please refer to the introduction in “Vertical Window”
on page 5-12.
12. CH1 Vertical Scale
 Display the voltage value per grid of CH1 waveform vertically.
 Use VIRTICAL
SCALE to modify this parameter.
 The following labels will be provided according to the current channel
setting: “Channel Coupling” (such as in AC coupling),
“Bandwidth Limit” (such as when bandwidth limit is enabled) and
“Input Impedance” (such as
when the input impedance is 50 Ω).
13. CH2 Vertical Scale
 Display the voltage value per grid of CH2 waveform vertically.
 Use VIRTICAL
SCALE to modify this parameter.
 The following labels will be provided according to the current channel
setting: “Channel Coupling” (such as in AC coupling),
“Bandwidth Limit” (such as when bandwidth limit is enabled) and
“Input Impedance” (such as when the input impedance is 50 Ω).
14. CH3 Vertical Scale
 Display the voltage value per grid of CH3 waveform vertically.
 Use VIRTICAL
SCALE to modify this parameter.
 The following labels will be provided according to the current channel
setting: “Channel Coupling” (such as in AC coupling),
“Bandwidth Limit” (such as when bandwidth limit is enabled) and