RIGOL DS6000 Series - Manual (Page 215)

12 Store and Recall RIGOL
DS6000 User’s Guide 12-5
Internal Store and Recall
Internal store and recall support “Traces”, “Waveforms” and “Setups” in Storage. In
the following part, “Traces” are taken as an example for illustration.
1. Save the specified type of file in internal memory.
1) Connect the signal to the oscilloscope and obtain stable display.
2) Press SAVE  Storage to select “Traces” and press Save to turn on the
interface as shown in Figure a. use to select “ Local Disk” and press
to turn on the local disk (Figure b).
Figure a
3) As shown in Figure b, the local disk can at most store 10 trace files. Use
to select the desired storage position, Save is illuminated and then press the
key to execute the saving operation. If the current position contains a file,
the original file can be overwritten or be delected by pressing Delete. Use
to select and then press down to return to the previous
directory.
Figure b
Note: in internal storage, New File and New Folder are not available.