RIGOL DS6000 Series - Manual (Page 138)

RIGOL 6 To Make Measurements
DS6000 User’s Guide 6-14
Quick Measurement after Auto
When the oscilloscope is correctly connected and has detected input signal, press
Auto enable the waveform auto setting function and open the following function
menu.
Single-period: measure the “Period” and “Frequency “of the
current signal within a single period and display the measurement
results at the bottom of the screen.
Multi-period: measure the “Period” and “Frequency “of the
current signal within multiple periods and display the
measurement results at the bottom of the screen.
Rise Time: measure the “Rise Time” of the current signal and
display the measurement result at the bottom of the screen.
Fall Time: measure the “Fall Time” of the current signal and
display the measurement result at the bottom of the screen.