RIGOL DS6000 Series - Manual (Page 107)

5 To Trigger the Oscilloscope RIGOL
DS6000 User’s Guide 5-15
 PAL: the frame frequency is 25 frames per second. The TV sweep line is 625
with the odd field goes first and the even field follows behind.
 SECAM: the frame frequency is 25 frames per second. The sweep line is 625
with interlacing sweep.
 HDTV: HDTV consists of 480P, 576P, 720P, 1080P and 1080I display formats.
The specified video standards are as follows:
480P the frame frequency is 60 frames per second; the TV sweep
line is 525; line-by-line sweep; the line frequency is 31.5
kHz.
576P the frame frequency is 60 frames per second; the TV sweep
line is 625; line-by-line sweep.
720P the frame frequency is 60 frames per second; the TV sweep
line is 750; line-by-line sweep; the line frequency is 45 kHz.
1080P the frame frequency is 60 frames per second; the TV sweep
line is 1125; line-by-line sweep.
1080I the field frequency is 50 to 60 fields per second; the frame
frequency is 25 to 30 frames per second; the TV sweep line
is 1125; interlacing sweep; the line frequency is 33.75 kHz.
Trigger Mode:
Press Sweep to select the Trigger Mode (page 5-3) under this trigger type as auto,
normal or single. The corresponding status light of the current trigger mode turns on.
Trigger Setting:
Press Setting to set the trigger parameters (trigger holdoff) under this trigger type.
Trigger Level:
Use TRIGGER LEVEL to modify the level. For details, please refer to the
description of “Trigger Level” on page 5-8.