RIGOL DS6000 Series - Manual (Page 147)

6 To Make Measurements RIGOL
DS6000 User’s Guide 6-23
Clear the Measurement
If you have currently turned on one or more items in the 24 measurement
parameters, you can “Delete” or “Recover” the 5 parameters ahead or “Delete” or
“Recover” all the measurement items that have been turned on. Note that the 5
parameters ahead is determined according to the order in which you turned them on
and they will not change as you delete one or more measurement items.
Press MEAS  Clear  Item n to “Delete” or “Recover” the specified
measurement item. When one measurement item is deleted or recovered, the
measurement result at the bottom of the screen will move one-item left or right.
Press MEAS  Clear  All Items to “Delete” or “Recover” all the measurement
items that have been turned on.
Note: press and hold MEAS to quickly remove and recover all the measurement
items currently enabled.